R50 is a 50 mm wide half-round rain gutter, a key component of Renoplast terrace, patio and balcony rainwater evacuation system. It is fixed to the selected Renoplast drip edging using stainless steel self-drilling fasteners. Compatible with Renoplast drip edging designed to be used with: Pedestal paving systems, i.e.: W30R PLUS, W35 PLUS, GRAND W60 Outdoor tile flooring systems, i.e.: K100R, K35 Resinous flooring systems, i.e.: K10R, K20R Key features: Effective and efficient evacuation of rain water from balconies, patios and terraces. Fully rust proofed. Rigid construction to facilitate even installation. R50 provides a complete and consistent terrace/balcony edge treatment system. Guaranteed durability and longevity.

R50 67 is a 67-degree 40 mm dia bend used to make offsets in R50 downpipes.

R50 135 internal gutter angle is fitted on internal 135-degree corners of R50 gutter system installed around terraces or balconies.

R50 running outlet is used to channel rainwater from R50 gutters to downpipes and connect two gutter lengths if appropriate.

R50 dia 40 mm round downpipe branch is used to connect two R50 downpipes into one.

R50 dia 40 mm, 50 cm long downpipe is part of the R50 gutter system designed to carry rainwater away from the building.

R50 90 external gutter angle is fitted on external 90-degree corners of R50 gutter system installed around terraces or balconies.

R50 downpipe clip is used to attach R50 dia. 40 mm downpipes to the building wall by means of 12 cm long threaded pins.

R50 135 external gutter angle is fitted on external 135-degree corners of R50 gutter system installed around terraces or balconies.

R50 union is used to connect R50 gutters with their matching angles.

R50 90 internal gutter angle is fitted on internal 90-degree corners of R50 gutter system installed around terraces or balconies.

R50 R+L gutter stopends are used to cap-off the right and left ends of R50 guttering.

Graphite, grey or brown sealant adhesive used to form watertight and durable joints between Renoplast R50/ RK65 gutter system components.

R50 87 is a 87-degree 40 mm dia bend used to make offsets in R50 downpipes.

R50 right hand stopend outlet channels water out of R50 round gutter and caps off the right-most gutter end.

R50 left hand stopend outlet channels water out of R50 round gutter and caps off the left-most gutter end.

R50 downpipe clip is used to attach R50 dia. 40 mm downpipes to the building wall by means of 25 cm long threaded pins.

R50 dia 40 mm, 100 cm long downpipe is part of the R50 gutter system designed to carry rainwater away from the building.

R50 dia 40 mm, 200 cm long downpipe is part of the R50 gutter system designed to carry rainwater away from the building.

R50 left gutter stopend is used to cap-off the left-most end of R50 guttering.

R50 right gutter stopend is used to cap-off the right-most end of R50 guttering.