RK65 square gutters | Renoplast DEV3

[EN] Rynna RK65 jest elementem systemowego odwodnienia tarasów i balkonów. Ma przekrój prostokątny o szerokości 65 mm i głębokości 40 mm. Montuje się ją do profili okapowych za pomocą wkrętów samowiercących ze stali nierdzewnej.

Kompatybilność z profilami okapowymi Renoplast:

W30R PLUS,
W35 PLUS,
W20R.

Kluczowe zalety rynny RK65:

Skuteczne i wydajne odprowadzanie wody z powierzchni balkonu i tarasu.
Pełna ochrona antykorozyjna.
Sztywna konstrukcja umożliwiająca idealnie równe osadzenie.
Kompletny i spójny system wykończenia strefy okapowej.
Gwarancja wieloletniej trwałości i niezawodności.

RK65 box gutter

RK65 box gutter is part of Renoplast terrace, patio and balcony drainage systems. RK65 box gutter is 65 mm wide and 40 mm deep. It is fixed to Renoplast drip edging using stainless steel self-drilling fasteners. Compatible with the following Renoplast drip edging systems: BASIC W30R PLUS, PRO W35 PLUS, UNIWERSAL W20R,  GRAND W60.  Key features: Very effective and efficient draining of rain water runoff from terraces, patios and balconies. Fully rust proofed. Rigid construction to facilitate even installation. RK65 provides a complete and consistent terrace/ balcony edge treatment system. Guaranteed durability and longevity.

RK65 87 45x45 mm offset bend

RK65 87 is a 67-degree 45x45 mm bend used to make offsets in RK65 downpipes.

RK65 running outlet

RK65 running outlet is used to channel rainwater from RK65 gutters to downpipes and connect two gutter lengths if appropriate.

RK65 R+L gutter stopends

RK65 R+L gutter stopends are used to cap-off the right and left ends of R50 guttering.

RK65 67 45x45 mm offset bend

RK65 67 is a 67-degree 45x45 mm bend used to make offsets in RK65 downpipes.

RK65 45x45 mm downpipe clip w/ 12 cm threaded pin

RK65 downpipe clip is used to attach RK65 45 x 45 mm box downpipes to the building wall by means of 12 cm long threaded pins.

RK65 135 external gutter angle

R50 135 external gutter angle is fitted on external 135-degree corners of RK65 gutter system installed around terraces or balconies.

RK65 90 external gutter angle

RK65 90 external gutter angle is fitted on external 90-degree corners of RK65 gutter system installed around terraces or balconies.

RK65 135 internal gutter angle

RK65 135 internal gutter angle is fitted on internal 135-degree corners of RK65 gutter system installed around terraces or balconies.

Gutter sealant adhesive 290 ml

Graphite, grey or brown sealant adhesive used to form watertight and durable joints between Renoplast R50/ RK65 gutter system components.

RK65 90 internal gutter angle

RK65 90 internal gutter angle is fitted on internal 90-degree corners of RK65 gutter system installed around terraces or balconies.

RK65 45x45 mm, 50 cm long downpipe

RK65 45x45 mm, 50 cm long downpipe is part of the R50 gutter system designed to carry rainwater away from the building.

RK65 gutter union

RK65 union is used to connect RK65 gutters with their matching angles.

RK65 right hand stopend outlet

RK65 right hand stopend outlet channels water out of RK65 box gutter and caps off the right-most gutter end.

RK65 left hand stopend outlet

RK65 right hand stopend outlet channels water out of RK65 gutter and caps off the left-most gutter end. 

RK65 45x45 mm box downpipe clip w/ 25 cm threaded pin

RK65 downpipe clip is used to attach RK65 45 x 45 mm box downpipes to the building wall by means of 25 cm long threaded pins.

RK65 45x45 mm, 100 cm long box downpipe

RK65 45x45 mm, 100 cm long box downpipe is part of the RK65 box gutter system designed to carry rainwater away from the building.

RK65 45x45 mm, 200 cm long box downpipe

RK65 45x45 mm, 200 cm long downpipe is part of the R65 box gutter system designed to carry rainwater away from the building.

RK65 left box gutter stopend

RK65 left gutter stopend is used to cap-off the left-most end of RK65 guttering.

RK65 right box gutter stopend

RK65 right gutter stopend is used to cap-off the right-most end of RK65 guttering.